`CM579PnioReadIM0Data` (FB)

FUNCTION_BLOCK CM579PnioReadIM0Data EXTENDS CM579PnioBase

function block to read IM0 data of specified PROFINET IO Device

InOut:

Scope	Name	Type	Initial	Comment	Inherited from
Input	`Execute`	`BOOL`	FALSE	A rising edge starts the operation, the output Busy goes to TRUE. In the first cycle all other inputs are read and stored, afterwards they are ignored. A falling edge does not stop the operation. After Done = TRUE or Error = TRUE and Execute = FALSE all outputs will be reset.	AbbETrig2
Output	`Done`	`BOOL`	FALSE	Operation is completed without error (while outputs Busy and Error are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE	AbbETrig2
	`Busy`	`BOOL`	FALSE	Operation is running (while outputs Done and Error are FALSE)	AbbETrig2
	`Error`	`BOOL`	FALSE	Operation is stopped with error (while outputs Busy and Done are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE. The output ErrorID gives more details about the error.	AbbETrig2
Input	`Device`	`AC500_IoDrvCM579Profinet.IDeviceCM579Profinet`		instance of CM579-PNIO device	CM579PnioBase
Output	`ErrorID`	ERROR_ID		error code that describes occurred error	CM579PnioBase
Output	`AddErrorID`	`UDINT`		additional description of error, meaning depends on value of output ErrorID	CM579PnioBase
Input	`DevName`	CM579PnioDevName		name of device from which the I&M0 data is to be read (e.g. ‘ci501-pn-01’ )
	`DevSlot`	`UINT`		slot from which the I&M0 data is to be read
	`DevSubSlot`	`UINT`		subslot from which the I&M0 data is to be read
Output	`VendorID`	`UINT`		VendorID of device
	`OrderID`	`STRING(20)`		OrderID of device
	`SerialNo`	`STRING(16)`		serial number of device
	`HardwareRev`	`UINT`		hardware revision
	`SoftwareRev`	CM579PnioIm0SwRev		software revision
	`RevisionCnt`	`UINT`		hardware revision count
	`ProfileID`	`UINT`		IO Device profile
	`ProfileSpecType`	`UINT`		profile specific device type
	`IMVersion`	CM579PnioIm0Version		version of implemented I&M0 data
	`IMSupported`	`WORD`		availability of I&M records, Bit0: profile specific I&M, Bit 1: I&M1, Bit 2: I&M2, Bit 3: I&M3, Bit 4: I&M4

Properties:

Job

Methods:

CheckInputs

PrepareJob

ResetOutputsAndMembers

SetOutputs

Structure:

CM579PnioReadIM0Data (FB)

`CM579PnioReadIM0Data` (FB)