PnioCntrlGetDevState (FB)

FUNCTION_BLOCK PnioCntrlGetDevState EXTENDS AbbETrig

Function block to get Slave Connection Information of a device

InOut:

Scope	Name	Type	Initial	Comment	Inherited from
Input	Execute	BOOL	FALSE	A rising edge starts the operation, the output Busy goes to TRUE. In the first cycle all other inputs are read and stored, afterwards they are ignored. A falling edge does not stop the operation. After Done = TRUE or Error = TRUE and Execute = FALSE all outputs will be reset.	AbbETrig
Output	Done	BOOL	FALSE	Operation is completed without error (while outputs Busy and Error are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE	AbbETrig
	Busy	BOOL	FALSE	Operation is running (while outputs Done and Error are FALSE)	AbbETrig
	Error	BOOL	FALSE	Operation is stopped with error (while outputs Busy and Done are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE. The output ErrorID gives more details about the error.	AbbETrig
Input	Slot	BYTE	0	Slot number of assigned coupler
	DevName	STRING(PNIOCNTRL_GLOBALS.PNIO_DEVNAME_LEN)	‘’	Name of the device (Station Name, e.g. ‘ci501-pn-03’)
Output	ErrorID	ERROR_ID	ERROR_ID.NO_ERROR	Error code description
	AddErrNo	UDINT	0	Additional error message
	Mac	ARRAY [1..6] OF BYTE		MAC
	Ip	DWORD	0	IP address
	Vendor	WORD	0	Vendor ID
	Device	WORD	0	Device ID
	Alarm	BOOL	FALSE	Alarm pending, output not yet supported! Until complete clarification of diagnosis! (Always: FALSE)
	Active	BOOL	FALSE	Device is currently registered as active
	Flags	DWORD	0	Status flags, see documentation