PnioCntrlGetDevIM0Data (FB)

FUNCTION_BLOCK PnioCntrlGetDevIM0Data EXTENDS AbbETrig

Access to the Identification and Maintenance Information of a certain PROFINET bus device FB uses PnioCntrlRead function block

InOut:

Scope	Name	Type	Initial	Comment	Inherited from
Input	Execute	BOOL	FALSE	A rising edge starts the operation, the output Busy goes to TRUE. In the first cycle all other inputs are read and stored, afterwards they are ignored. A falling edge does not stop the operation. After Done = TRUE or Error = TRUE and Execute = FALSE all outputs will be reset.	AbbETrig
Output	Done	BOOL	FALSE	Operation is completed without error (while outputs Busy and Error are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE	AbbETrig
	Busy	BOOL	FALSE	Operation is running (while outputs Done and Error are FALSE)	AbbETrig
	Error	BOOL	FALSE	Operation is stopped with error (while outputs Busy and Done are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE. The output ErrorID gives more details about the error.	AbbETrig
Input	Slot	BYTE	0	Slot number of assigned coupler
	DevName	STRING(PNIOCNTRL_GLOBALS.PNIO_DEVNAME_LEN)	‘’	Name of the device (Station Name, e.g. ‘ci501-pn-03’)
	DevSlot	WORD	0	Slot
Output	ErrorID	ERROR_ID	ERROR_ID.NO_ERROR	Error code description
	AddErrNo	UDINT	0	Additional error message
	VendorId	WORD	0	Unique ID indentifying the vendor of the device
	OrderId	STRING(20)	‘’	Ordering information of the device
	SerNo	STRING(16)	‘’	Serial number of the device
	HwRev	WORD	0	Hardware revision
	SwRev	PnioImSwRevType		Software revision
	RevCnt	WORD	0	Hardware revision count
	ProfileId	WORD	0	IO Device profile
	ProfileSpec	WORD	0	IO Device profile variation
	ImVersion	PnioImVersionType		Version of the implemented identification and maintence functions
	ImSupported	WORD	0	Supported information and maintence messages