Sm560Send (FB)

FUNCTION_BLOCK PUBLIC FINAL Sm560Send EXTENDS AbbETrig

Write non-safe data to a SM560 module

InOut:

Scope	Name	Type	Initial	Comment	Inherited from
Input	Execute	BOOL	FALSE	A rising edge starts the operation, the output Busy goes to TRUE. In the first cycle all other inputs are read and stored, afterwards they are ignored. A falling edge does not stop the operation. After Done = TRUE or Error = TRUE and Execute = FALSE all outputs will be reset.	AbbETrig
Output	Done	BOOL	FALSE	Operation is completed without error (while outputs Busy and Error are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE	AbbETrig
	Busy	BOOL	FALSE	Operation is running (while outputs Done and Error are FALSE)	AbbETrig
	Error	BOOL	FALSE	Operation is stopped with error (while outputs Busy and Done are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE. The output ErrorID gives more details about the error.	AbbETrig
Input	Device	AC500_IoDrvSM560.IDeviceSM560		Reference to Coupler instance
	Data	POINTER TO BYTE	0	Address of variable where data to be sent is stored (via ADR operator); data is copied into local buffer during start cycle
	DataLen	DWORD	0	Length of data to send
Output	ErrorID	ERROR_ID	ERROR_ID.NO_ERROR	Error code describing error condition
	AddErrNo	UDINT	16#0	Additional internal error code