ModTcpMast2 (FB)

FUNCTION_BLOCK ModTcpMast2 EXTENDS ModTcpMast

Function Block serves to send Modbus on TCP/IP requests to a server and evaluate the response

InOut:

Scope	Name	Type	Initial	Comment	Inherited from
Input	Execute	BOOL	FALSE	A rising edge starts the operation, the output Busy goes to TRUE. In the first cycle all other inputs are read and stored, afterwards they are ignored. A falling edge does not stop the operation. After Done = TRUE or Error = TRUE and Execute = FALSE all outputs will be reset.	AbbETrig
Output	Done	BOOL	FALSE	Operation is completed without error (while outputs Busy and Error are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE	AbbETrig
	Busy	BOOL	FALSE	Operation is running (while outputs Done and Error are FALSE)	AbbETrig
	Error	BOOL	FALSE	Operation is stopped with error (while outputs Busy and Done are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE. The output ErrorID gives more details about the error.	AbbETrig
Input	Eth	BYTE	ETH1	Index number of the assigned Ethernet interface - input is ignored, existing for compatibility reasons only	ModTcpMast
	IPAdr	DWORD	0	IP address of the remote Modbus TCP Server device	ModTcpMast
	UnitID	BYTE	0	Unit identifier for the Modbus TCP frame	ModTcpMast
	Fct	BYTE	0	Function Code as specified in Modbus Protocol Specification	ModTcpMast
	Addr	WORD	0	Operand/Register address in remote Modbus TCP Server device	ModTcpMast
	Nb	WORD	0	Amount of data units to be sent/received	ModTcpMast
	Data	DWORD	0	Address of local buffer for data to be sent or received	ModTcpMast
Output	ErrorID	ERROR_ID	ERROR_ID.NO_ERROR	Code of error occured during execution NO_ERROR Execution successfully completed ERR_NOT_CONFIGURED Modbus TCP not configured ERR_FCT_NOT_SUPPORTED Function code not supported ERR_ILLEGAL_REGISTER_ADDRESS Illegal register address ERR_INVALID_ACCESS Invalid address of local storage of data to read/write, inputs DATA / NB ERR_DATA_SIZE Number of data to read/write exceeds capabilities ERR_INTERNAL_PORTING Porting layer error. Operating system signaled error ERR_INTERNAL_INVALID_HANDLE Illegal argument, unknown instance ‘dwHandle’. Internal error ERR_FAILED_CONNECT Failed to connect to Server ERR_CONNECTION_CLOSED Connection closed or unexpected result reported by stack ERR_TIMEOUT Timeout expired. Server did not respond within specified time ERR_EXCEPT_01_ILLEGAL_FUNCTION Illegal function exception. Exception response by Server containing error code 01 / 16#01 ERR_EXCEPT_02_ILLEGAL_DATA_ADDRESS Illegal data address. Exception response by Server containing error code 02 / 16#02 ERR_EXCEPT_03_ILLEGAL_DATA_VALUE Illegal data value. Exception response by Server containing error code 03 / 16#03 ERR_EXCEPT_04_SERVER_DEVICE_FAILURE Server device failure. Exception response by Server containing error code 04 / 16#04 ERR_EXCEPT_05_SERVER_ACKNOWLEDGE Server acknowledge. Exception response by Server containing error code 05 / 16#05 ERR_EXCEPT_06_SERVER_DEVICE_BUSY Server device busy. Exception response by Server containing error code 06 / 16#06 ERR_EXCEPT_07_SERVER_NO_ACKNOWLEDGE Server no acknowledge. Exception response by Server containing error code 07 / 16#07 ERR_EXCEPT_08_MEMORY_PARITY_ERROR Memory parity error. Exception response by Server containing error code 08 / 16#08 ERR_EXCEPT_09_SERVER_PASSIVE Probably passive Server. Exception response by Server containing error code 09 / 16#09 ERR_EXCEPT_0A_GATEWAY_PATH_UNAVAILABLE Gateway path unavailable. Exception response by Server containing error code 10 / 16#0A ERR_EXCEPT_0B_GATEWAY_TARGET_DEVICE Gateway target device failed to respond. Exception response by Server containing error code 11 / 16#0B ERR_INTERNAL_INVALID_STATE Invalid state, fatal internal error ERR_NO_MEMORY Not enough memory BUSY Busy, call again ERR_INTERNAL_IO Internal error in I/O layer ERR_INTERNAL_ILLEGAL_STATE Protocol stack in illegal state. Fatal internal error ERR_INTERNAL_IO_RETRY Retry I/O operation. Operation not yet completed, function to be called again ERR_INTERNAL_UNEXPECTED_STATE Unexpected state. Fatal internal error ERR_INVALID_TIMEOUT_VALUE Invalid value for response timeout ERR_INVALID_ACCESS Invalid address of local storage of data to read/write ERR_ENDIANESS_NOT_SUPPORTED Endianess / byte order not supported	ModTcpMast
Input	RespTimeout	WORD	DEFAULTS.CONFIG_RESPONSE_TIME	Slave response timeout in ms. Maximum time waiting for a response after having sent a request
	KeepAlive	DWORD	DEFAULTS.CONFIG_KEEP_ALIVE	Open Modbus Time in ms. A connection to a Server stays open after sending a request until the time is expired. If there is another request within this time, the timer is restarted. On expiration the connection is closed.
	ByteOrder	CAA.ENDIANESS	DEFAULTS.CONFIG_BYTE_ORDER	Endianess of data, little or Big Endian; Modbus Standard is Big Endian
	Port	WORD	DEFAULTS.CONFIG_PORT	TCP Port
	ResetOnClose	BOOL	FALSE	Reset connection when closing it (TRUE) or gaceful close (FALSE) like ModTcpMast
	ConnectTimeout	DWORD	DEFAULTS.CONFIG_CONNECT_TO	Connect timeout [ms]. Value 0 corresponds to OS default