EthOwnIPInfo (FB)

FUNCTION_BLOCK EthOwnIPInfo EXTENDS AbbETrig

Supplies the IP setup details of the own PLC

InOut:

Scope	Name	Type	Initial	Comment	Inherited from
Input	Execute	BOOL	FALSE	A rising edge starts the operation, the output Busy goes to TRUE. In the first cycle all other inputs are read and stored, afterwards they are ignored. A falling edge does not stop the operation. After Done = TRUE or Error = TRUE and Execute = FALSE all outputs will be reset.	AbbETrig
Output	Done	BOOL	FALSE	Operation is completed without error (while outputs Busy and Error are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE	AbbETrig
	Busy	BOOL	FALSE	Operation is running (while outputs Done and Error are FALSE)	AbbETrig
	Error	BOOL	FALSE	Operation is stopped with error (while outputs Busy and Done are FALSE). This output is TRUE for at least one cycle or until Execute is set to FALSE. The output ErrorID gives more details about the error.	AbbETrig
Input	Eth	BYTE	ETH1	Index number of the assigned interface
Output	ErrorID	ERROR_ID	ERROR_ID.NO_ERROR	Error code describing error condition
	IPAdr	DWORD	0	Own IP address
	NetMask	DWORD	0	Netmask of local subnet
	Gateway	DWORD	0	IP address of default gateway
	BOOTP	BOOL	FALSE	BOOTP feature not supported in this version
	DHCP	BOOL	FALSE	DHCP feature not supported in this version